Free blood drip SVG

Layered blood drip border in three colours SVG

Layered blood drip border in three colours, in layered colours
Layered blood drip border in three colours. The preview is the SVG file itself.

Three layers to stack: a dark red border as the base, a brighter red laid just inside it, and pale highlights on the longest runs. The two reds give the drips a wet, rounded look.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 52 mm (3.94 × 2.05 in), scales to any size
Pieces7 separate pieces
Outlines to cut7 outlines
Cut length1,190 mm at this size
Narrowest part5.2 mm at this size
Nodes208 curve and line segments
Layers3: dark red, red and highlights

Measured from the file. PNG: 2,000 × 1,079 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)1.3 mm302 mm160Vinyl, card and thin sheet
2 × 1.04 in (51 × 26 mm)2.6 mm605 mm45Vinyl, card and thin sheet
3 × 1.56 in (76 × 40 mm)4 mm907 mm18Any material, including 3 mm wood and acrylic
4 × 2.08 in (102 × 53 mm)5.3 mm1,209 mm10Any material, including 3 mm wood and acrylic
6 × 3.13 in (152 × 79 mm)7.9 mm1,814 mm3Any material, including 3 mm wood and acrylic
8 × 4.17 in (203 × 106 mm)11 mm2,418 mm2Any material, including 3 mm wood and acrylic
12 × 6.25 in (305 × 159 mm)16 mm3,627 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood smear with drips All 16 blood drips Blood drip border →