Free blood drip SVG

Blood smear with drips SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blood smear with drips, as a solid black shape
Blood smear with drips. The preview is the SVG file itself.

A hand-wide swipe of streaks that fades into ragged ends, with five runs dripping from its lower edge. For the inside of a window, a shower curtain or the side of a treat bucket.

What is in the file

Size100 × 58 mm (3.94 × 2.28 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length568 mm at this size
Narrowest part1.8 mm at this size
Nodes116 curve and line segments

Measured from the file. PNG: 2,000 × 1,188 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.46 mm144 mm150Too fine for most machines
2 × 1.16 in (51 × 29 mm)0.91 mm289 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)1.4 mm433 mm18Vinyl, card and thin sheet
4 × 2.31 in (102 × 59 mm)1.8 mm577 mm8Vinyl, card and thin sheet
6 × 3.47 in (152 × 88 mm)2.7 mm866 mm3Vinyl, card and thin sheet
8 × 4.62 in (203 × 117 mm)3.7 mm1,154 mm2Any material, including 3 mm wood and acrylic
12 × 6.94 in (305 × 176 mm)5.5 mm1,731 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood drip into a puddle All 16 blood drips Layered blood drip border in three colours →