Free blood drip SVG

Dripping blood sign panel SVG

Dripping blood sign panel, as a solid black shape — Dripping blood sign panel. The preview is the SVG file itself.

A solid panel with rounded top corners whose lower edge runs away in drips. The panel is blank: cut your lettering out of it, or lay it on top in white, for a party sign or a sweet table.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.51 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	503 mm at this size
Narrowest part	3.7 mm at this size
Nodes	103 curve and line segments

Measured from the file. PNG: 2,000 × 1,304 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	0.94 mm	128 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.28 in (51 × 32 mm)	1.9 mm	256 mm	40	Vinyl, card and thin sheet
3 × 1.91 in (76 × 49 mm)	2.8 mm	383 mm	15	Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)	3.8 mm	511 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.83 in (152 × 97 mm)	5.6 mm	767 mm	3	Any material, including 3 mm wood and acrylic
8 × 5.1 in (203 × 130 mm)	7.5 mm	1,022 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.66 in (305 × 194 mm)	11 mm	1,533 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood drip outline All 16 blood drips Blood drip frame →