Free bear SVG

Geometric bear head SVG

Geometric bear head, drawn as a line — Geometric bear head. The preview is the SVG file itself.

A bear head drawn with straight lines only: the outline, the folds between its facets, a solid nose and two solid eyes. One connected piece for foil, engraving and wall art.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	28: 1 outer edge and 27 cut-outs
Cut length	1,724 mm at this size
Narrowest part	2.3 mm at this size
Nodes	264 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.58 mm	438 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)	1.2 mm	876 mm	25	Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)	1.8 mm	1,314 mm	9	Vinyl, card and thin sheet
4 × 3.95 in (102 × 100 mm)	2.3 mm	1,752 mm	4	Vinyl, card and thin sheet
6 × 5.92 in (152 × 150 mm)	3.5 mm	2,627 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.9 in (203 × 201 mm)	4.7 mm	3,503 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.84 in (305 × 301 mm)	7 mm	5,255 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bear SVG files

← Mandala bear All 16 bears Bear with trees →