Walking grizzly bear SVG
A grizzly mid stride in profile: shoulder hump, low head, long muzzle and four flat paws, with the eye, ear, shoulder and haunch cut as fine lines.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.28 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 531 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 172 curve and line segments |
Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.76 mm | 135 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.16 in (51 × 29 mm) | 1.5 mm | 270 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.74 in (76 × 44 mm) | 2.3 mm | 405 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.32 in (102 × 59 mm) | 3 mm | 539 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.48 in (152 × 88 mm) | 4.6 mm | 809 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.64 in (203 × 118 mm) | 6.1 mm | 1,079 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.96 in (305 × 177 mm) | 9.1 mm | 1,618 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bear silhouette 
Standing bear on its hind legs 
Bear outline 
Polar bear 
Sitting bear 
Sleeping bear 
Baby bear cub 
Bear family 