Free bear SVG

Standing bear on its hind legs SVG

Standing bear on its hind legs, as a solid black shape — Standing bear on its hind legs. The preview is the SVG file itself.

A bear reared up on its hind legs with both front paws held out, seen from the side. The eye, ear, shoulder and thigh are cut lines. Taller than it is wide.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	59 × 100 mm (2.33 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	457 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	162 curve and line segments

Measured from the file. PNG: 1,217 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.59 × 1 in (15 × 25 mm)	Over 1.5 mm	116 mm	150	Vinyl, card and thin sheet
1.19 × 2 in (30 × 51 mm)	Over 3 mm	232 mm	40	Any material, including 3 mm wood and acrylic
1.78 × 3 in (45 × 76 mm)	Over 4.6 mm	348 mm	18	Any material, including 3 mm wood and acrylic
2.37 × 4 in (60 × 102 mm)	Over 6.1 mm	464 mm	8	Any material, including 3 mm wood and acrylic
3.56 × 6 in (90 × 152 mm)	Over 9.1 mm	696 mm	3	Any material, including 3 mm wood and acrylic
4.74 × 8 in (120 × 203 mm)	Over 12 mm	929 mm	2	Any material, including 3 mm wood and acrylic
7.12 × 12 in (181 × 305 mm)	Over 18 mm	1,393 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bear SVG files

← Bear silhouette All 16 bears Bear outline →