Bear outline SVG
The walking bear as one even line, with the curves of its shoulder and haunch drawn in. For colouring pages, foil, engraving and pen plotters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.3 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 873 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 273 curve and line segments |
Measured from the file. PNG: 2,000 × 1,202 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.48 mm | 222 mm | 150 | Too fine for most machines |
| 2 × 1.17 in (51 × 30 mm) | 0.97 mm | 443 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.75 in (76 × 45 mm) | 1.4 mm | 665 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.34 in (102 × 59 mm) | 1.9 mm | 887 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.51 in (152 × 89 mm) | 2.9 mm | 1,330 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.68 in (203 × 119 mm) | 3.9 mm | 1,774 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.02 in (305 × 178 mm) | 5.8 mm | 2,661 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Polar bear 
Sitting bear 
Sleeping bear 
Baby bear cub 
Bear family 
Bear head 
Cute bear face 
Floral bear with a flower crown 