Bear family SVG
A mother bear with two cubs walking behind her, nose to tail. They overlap where they touch, so the three weld into one piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 35 mm (3.94 × 1.39 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 487 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 288 curve and line segments |
Measured from the file. PNG: 2,000 × 758 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.35 in (25 × 9 mm) | 0.86 mm | 124 mm | 220 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.71 in (51 × 18 mm) | 1.7 mm | 247 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.06 in (76 × 27 mm) | 2.6 mm | 371 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.42 in (102 × 36 mm) | 3.5 mm | 495 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.12 in (152 × 54 mm) | 5.2 mm | 742 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.83 in (203 × 72 mm) | 6.9 mm | 990 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.25 in (305 × 108 mm) | 10 mm | 1,484 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bear head 
Cute bear face 
Floral bear with a flower crown 
Teddy bear 
Mandala bear 
Geometric bear head 
Bear with trees 
Walking grizzly bear 