Bear with trees SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A walking bear with a stand of pine trees and a moon cut out of its body, as if the forest showed through. For cabin signs, camping gear and travel mugs.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.28 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 619 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 221 curve and line segments |
| Also found as | Bear with tree SVG |
Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.58 mm | 157 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.16 in (51 × 29 mm) | 1.2 mm | 314 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.74 in (76 × 44 mm) | 1.8 mm | 472 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.32 in (102 × 59 mm) | 2.3 mm | 629 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.48 in (152 × 88 mm) | 3.5 mm | 943 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.64 in (203 × 118 mm) | 4.7 mm | 1,258 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.96 in (305 × 177 mm) | 7 mm | 1,887 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.