Sitting bear SVG
A bear sitting up on its haunches with one hind leg stretched out in front and a paw resting on its knee. The eye, ear, arm and thigh are cut lines.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 81 × 100 mm (3.17 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 572 mm at this size |
| Narrowest part | 4.7 mm at this size |
| Nodes | 171 curve and line segments |
Measured from the file. PNG: 1,625 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.81 × 1 in (20 × 25 mm) | 1.2 mm | 145 mm | 120 | Vinyl, card and thin sheet |
| 1.61 × 2 in (41 × 51 mm) | 2.4 mm | 291 mm | 30 | Vinyl, card and thin sheet |
| 2.42 × 3 in (61 × 76 mm) | 3.6 mm | 436 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.22 × 4 in (82 × 102 mm) | 4.8 mm | 581 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.83 × 6 in (123 × 152 mm) | 7.2 mm | 872 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.44 × 8 in (164 × 203 mm) | 9.6 mm | 1,162 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.66 × 12 in (245 × 305 mm) | 14 mm | 1,743 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Sleeping bear 
Baby bear cub 
Bear family 
Bear head 
Cute bear face 
Floral bear with a flower crown 
Teddy bear 
Mandala bear 