Polar bear SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A polar bear walking in profile: long neck, small head, no shoulder hump, a high rump and big paws. A solid shape to cut from white vinyl or card.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 376 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 123 curve and line segments |
Measured from the file. PNG: 2,000 × 1,108 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.25 mm | 96 mm | 160 | Too fine for most machines |
| 2 × 1.07 in (51 × 27 mm) | 0.51 mm | 191 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.61 in (76 × 41 mm) | 0.76 mm | 287 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.14 in (102 × 54 mm) | 1 mm | 382 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.22 in (152 × 82 mm) | 1.5 mm | 573 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.29 in (203 × 109 mm) | 2 mm | 764 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.43 in (305 × 163 mm) | 3 mm | 1,146 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.