Mandala bear SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The walking bear with a mandala cut through its side: two rings of petals and a ring of dots around a flower, with a smaller flower on its shoulder.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.28 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 36: 1 outer edge and 35 cut-outs |
| Cut length | 823 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 343 curve and line segments |
Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.48 mm | 209 mm | 150 | Too fine for most machines |
| 2 × 1.16 in (51 × 29 mm) | 0.97 mm | 418 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.74 in (76 × 44 mm) | 1.4 mm | 627 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.32 in (102 × 59 mm) | 1.9 mm | 836 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.48 in (152 × 88 mm) | 2.9 mm | 1,254 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.64 in (203 × 118 mm) | 3.9 mm | 1,672 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.96 in (305 × 177 mm) | 5.8 mm | 2,509 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.