Bear head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wild bear head from the front: broad furred cheeks, small eyes, a wide nose and the lines of a long muzzle. Exactly symmetrical, for cabin signs and wall art.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.93 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 817 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 204 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,996 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.76 mm | 208 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.5 mm | 415 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.99 in (76 × 76 mm) | 2.3 mm | 623 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.99 in (102 × 101 mm) | 3 mm | 830 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 5.99 in (152 × 152 mm) | 4.6 mm | 1,245 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 7.98 in (203 × 203 mm) | 6.1 mm | 1,660 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.98 in (305 × 304 mm) | 9.1 mm | 2,490 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.