Free bat SVG

Bat with wings raised SVG

Bat with wings raised, as a solid black shape
Bat with wings raised. The preview is the SVG file itself.

Wings thrown up above the head, wrists higher than the ears, as if about to drop from a rafter.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.52 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length393 mm at this size
Narrowest part3.8 mm at this size
Nodes130 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,310 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.97 mm100 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.28 in (51 × 33 mm)1.9 mm200 mm40Vinyl, card and thin sheet
3 × 1.92 in (76 × 49 mm)2.9 mm299 mm15Vinyl, card and thin sheet
4 × 2.56 in (102 × 65 mm)3.9 mm399 mm8Any material, including 3 mm wood and acrylic
6 × 3.85 in (152 × 98 mm)5.8 mm599 mm3Any material, including 3 mm wood and acrylic
8 × 5.13 in (203 × 130 mm)7.7 mm799 mm2Any material, including 3 mm wood and acrylic
12 × 7.69 in (305 × 195 mm)12 mm1,198 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Classic bat with spread wings All 17 bats Gliding bat with wings swept down →