Free bat SVG

Bat with wing bones SVG

Bat with wing bones, as a solid black shape — Bat with wing bones. The preview is the SVG file itself.

Half-raised wings with three slits in each along the finger bones, which makes them read as stretched skin. Best at 80 mm or wider.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 53 mm (3.94 × 2.08 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	694 mm at this size
Narrowest part	2.5 mm at this size
Nodes	185 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,094 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.53 in (25 × 13 mm)	0.64 mm	176 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.06 in (51 × 27 mm)	1.3 mm	353 mm	45	Vinyl, card and thin sheet
3 × 1.59 in (76 × 40 mm)	1.9 mm	529 mm	18	Vinyl, card and thin sheet
4 × 2.12 in (102 × 54 mm)	2.5 mm	705 mm	10	Vinyl, card and thin sheet
6 × 3.17 in (152 × 81 mm)	3.8 mm	1,058 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.23 in (203 × 107 mm)	5.1 mm	1,410 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.35 in (305 × 161 mm)	7.6 mm	2,115 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Wide bat for banners All 17 bats Simple chunky bat →