Free bat SVG

Wide bat for banners SVG

Wide bat for banners, as a solid black shape
Wide bat for banners. The preview is the SVG file itself.

A long, low bat with four scallops on each wing, well over twice as wide as it is tall. Made for mantel banners and the tops of signs.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 41 mm (3.94 × 1.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length302 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes130 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 862 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)Over 1.5 mm77 mm200Vinyl, card and thin sheet
2 × 0.82 in (51 × 21 mm)Over 3 mm153 mm60Any material, including 3 mm wood and acrylic
3 × 1.22 in (76 × 31 mm)Over 4.6 mm230 mm24Any material, including 3 mm wood and acrylic
4 × 1.63 in (102 × 41 mm)Over 6.1 mm307 mm12Any material, including 3 mm wood and acrylic
6 × 2.45 in (152 × 62 mm)Over 9.1 mm460 mm4Any material, including 3 mm wood and acrylic
8 × 3.26 in (203 × 83 mm)Over 12 mm614 mm3Any material, including 3 mm wood and acrylic
12 × 4.9 in (305 × 124 mm)Over 18 mm920 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Gliding bat with wings swept down All 17 bats Bat with wing bones →