Free bat SVG

Spooky bat with ragged wings SVG

Spooky bat with ragged wings, as a solid black shape — Spooky bat with ragged wings. The preview is the SVG file itself.

Long ears, long claws, a long tail point and wings torn into six uneven scallops each, for a meaner outline than the classic bat.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 57 mm (3.94 × 2.25 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	428 mm at this size
Narrowest part	3.9 mm at this size
Nodes	155 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,177 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.57 in (25 × 15 mm)	0.99 mm	109 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.14 in (51 × 29 mm)	2 mm	217 mm	45	Vinyl, card and thin sheet
3 × 1.72 in (76 × 44 mm)	3 mm	326 mm	18	Vinyl, card and thin sheet
4 × 2.29 in (102 × 58 mm)	4 mm	435 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.43 in (152 × 87 mm)	5.9 mm	652 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.58 in (203 × 116 mm)	7.9 mm	870 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.86 in (305 × 174 mm)	12 mm	1,305 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Simple chunky bat All 17 bats Cute bat with a face →