Free bat SVG

Pair of bat earrings SVG

Pair of bat earrings, as a solid black shape — Pair of bat earrings. The preview is the SVG file itself.

Two matching bats, each with a hanging loop above its head. Cut at about 45 mm wide from acrylic, faux leather or thin wood; the loop takes a jump ring.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	88 × 100 mm (3.46 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	6: 2 outer edges and 4 cut-outs
Cut length	711 mm at this size
Narrowest part	2.3 mm at this size
Nodes	286 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,765 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.88 × 1 in (22 × 25 mm)	0.58 mm	181 mm	110	Fine detail: vinyl and paper only, weed with care
1.76 × 2 in (45 × 51 mm)	1.2 mm	361 mm	30	Vinyl, card and thin sheet
2.63 × 3 in (67 × 76 mm)	1.8 mm	542 mm	12	Vinyl, card and thin sheet
3.51 × 4 in (89 × 102 mm)	2.3 mm	722 mm	6	Vinyl, card and thin sheet
5.27 × 6 in (134 × 152 mm)	3.5 mm	1,084 mm	2	Any material, including 3 mm wood and acrylic
7.02 × 8 in (178 × 203 mm)	4.7 mm	1,445 mm	1	Any material, including 3 mm wood and acrylic
10.54 × 12 in (268 × 305 mm)	7 mm	2,167 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Pair of bat wings All 17 bats Bat outline →