Free bat SVG

Classic bat with spread wings SVG

Classic bat with spread wings, as a solid black shape
Classic bat with spread wings. The preview is the SVG file itself.

The Halloween bat: pointed ears, a claw on each wrist, wings spread wide and three scallops along each trailing edge. A plain silhouette with nothing to weed.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 52 mm (3.94 × 2.06 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length374 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes129 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,083 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)Over 1.5 mm95 mm160Vinyl, card and thin sheet
2 × 1.05 in (51 × 27 mm)Over 3 mm190 mm45Any material, including 3 mm wood and acrylic
3 × 1.57 in (76 × 40 mm)Over 4.6 mm285 mm18Any material, including 3 mm wood and acrylic
4 × 2.09 in (102 × 53 mm)Over 6.1 mm380 mm10Any material, including 3 mm wood and acrylic
6 × 3.14 in (152 × 80 mm)Over 9.1 mm570 mm3Any material, including 3 mm wood and acrylic
8 × 4.18 in (203 × 106 mm)Over 12 mm760 mm2Any material, including 3 mm wood and acrylic
12 × 6.28 in (305 × 159 mm)Over 18 mm1,140 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Bat line drawing with wing bones All 17 bats Bat with wings raised →