Free bat SVG

Bat line drawing with wing bones SVG

Bat line drawing with wing bones, drawn as a line — Bat line drawing with wing bones. The preview is the SVG file itself.

A raised-wing bat drawn in line, with a bone running from each wrist to each finger end. One connected piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.52 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	903 mm at this size
Narrowest part	2 mm at this size
Nodes	285 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,310 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	0.51 mm	229 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.28 in (51 × 33 mm)	1 mm	459 mm	40	Vinyl, card and thin sheet
3 × 1.92 in (76 × 49 mm)	1.5 mm	688 mm	15	Vinyl, card and thin sheet
4 × 2.56 in (102 × 65 mm)	2 mm	917 mm	8	Vinyl, card and thin sheet
6 × 3.85 in (152 × 98 mm)	3 mm	1,376 mm	3	Any material, including 3 mm wood and acrylic
8 × 5.13 in (203 × 130 mm)	4.1 mm	1,835 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.69 in (305 × 195 mm)	6.1 mm	2,752 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Bat outline All 17 bats Classic bat with spread wings →