Free bat SVG

Cute bat with a face SVG

Cute bat with a face, as a solid black shape
Cute bat with a face. The preview is the SVG file itself.

A big round head, wide ears, small wings and a face cut out: two round eyes and a grin with two fangs.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.52 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length463 mm at this size
Narrowest part5.5 mm at this size
Nodes150 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,308 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)1.4 mm118 mm140Vinyl, card and thin sheet
2 × 1.28 in (51 × 33 mm)2.8 mm235 mm40Vinyl, card and thin sheet
3 × 1.92 in (76 × 49 mm)4.2 mm353 mm15Any material, including 3 mm wood and acrylic
4 × 2.56 in (102 × 65 mm)5.6 mm470 mm8Any material, including 3 mm wood and acrylic
6 × 3.84 in (152 × 98 mm)8.4 mm706 mm3Any material, including 3 mm wood and acrylic
8 × 5.12 in (203 × 130 mm)11 mm941 mm2Any material, including 3 mm wood and acrylic
12 × 7.68 in (305 × 195 mm)17 mm1,411 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Spooky bat with ragged wings All 17 bats Angular bat with straight edges →