Free bat SVG

Simple chunky bat SVG

Simple chunky bat, as a solid black shape
Simple chunky bat. The preview is the SVG file itself.

Two scallops a side, short ears, no claws and a fat body. The bat to cut very small, or from felt and foam.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 47 mm (3.94 × 1.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length318 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes103 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 979 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)Over 1.5 mm81 mm180Vinyl, card and thin sheet
2 × 0.94 in (51 × 24 mm)Over 3 mm162 mm50Any material, including 3 mm wood and acrylic
3 × 1.41 in (76 × 36 mm)Over 4.6 mm242 mm21Any material, including 3 mm wood and acrylic
4 × 1.88 in (102 × 48 mm)Over 6.1 mm323 mm10Any material, including 3 mm wood and acrylic
6 × 2.81 in (152 × 71 mm)Over 9.1 mm485 mm4Any material, including 3 mm wood and acrylic
8 × 3.75 in (203 × 95 mm)Over 12 mm646 mm3Any material, including 3 mm wood and acrylic
12 × 5.63 in (305 × 143 mm)Over 18 mm969 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bat SVG files

← Bat with wing bones All 17 bats Spooky bat with ragged wings →