Tall stovepipe 3D top hat SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The tall, narrow hat of a storybook gentleman: the same three pieces, with a crown nearly twice as tall as it is wide. Cut 240 mm tall, it is 57 mm across the crown, 97 mm tall and 99 mm across the brim, and the sheet fits A4 or Letter card. Loose pieces.
What is in the file
| Size | 79 × 100 mm (3.11 × 3.94 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 59: 3 outer edges and 56 cut-outs |
| Cut length | 917 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 342 curve and line segments |
Measured from the file. PNG: 1,594 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.79 × 1 in (20 × 25 mm) | 0.51 mm | 233 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.58 × 2 in (40 × 51 mm) | 1 mm | 466 mm | 30 | Vinyl, card and thin sheet |
| 2.37 × 3 in (60 × 76 mm) | 1.5 mm | 699 mm | 12 | Vinyl, card and thin sheet |
| 3.16 × 4 in (80 × 102 mm) | 2 mm | 932 mm | 6 | Vinyl, card and thin sheet |
| 4.73 × 6 in (120 × 152 mm) | 3 mm | 1,398 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.31 × 8 in (160 × 203 mm) | 4.1 mm | 1,863 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.47 × 12 in (240 × 305 mm) | 6.1 mm | 2,795 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
3D top hat favour box with a lid Solid · 4 pieces -
Two mini 3D top hats for a cake Solid · 4 pieces -
Flared 3D top hat with a curved band Solid · 4 pieces -
Snowman 3D top hat with holly Solid · 5 pieces -
Mini 3D top hat for a headband Solid · 5 pieces -
St Patrick’s Day 3D top hat with a buckle Solid · 5 pieces -
3D top hat to print and cut by hand Outline · 40 pieces -
3D top hat made up, in four colours Layered · 4 pieces
← 3D top hat with a band All 10 3D top hats 3D top hat favour box with a lid →