Two mini 3D top hats for a cake SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two small hats on one sheet, for the top of a cake, a pair of cupcakes or place settings. Each is a crown strip and a brim ring whose middle is the top. Cut 170 mm tall, each hat is 37 mm across the crown, 35 mm tall and 63 mm across the brim. Loose pieces.
What is in the file
| Size | 78 × 100 mm (3.06 × 3.94 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 108: 4 outer edges and 104 cut-outs |
| Cut length | 1,304 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 642 curve and line segments |
Measured from the file. PNG: 1,571 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | 0.51 mm | 331 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.55 × 2 in (39 × 51 mm) | 1 mm | 662 mm | 30 | Vinyl, card and thin sheet |
| 2.33 × 3 in (59 × 76 mm) | 1.5 mm | 994 mm | 12 | Vinyl, card and thin sheet |
| 3.11 × 4 in (79 × 102 mm) | 2 mm | 1,325 mm | 6 | Vinyl, card and thin sheet |
| 4.66 × 6 in (118 × 152 mm) | 3 mm | 1,987 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.22 × 8 in (158 × 203 mm) | 4.1 mm | 2,650 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.32 × 12 in (237 × 305 mm) | 6.1 mm | 3,975 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
Flared 3D top hat with a curved band Solid · 4 pieces -
Snowman 3D top hat with holly Solid · 5 pieces -
Mini 3D top hat for a headband Solid · 5 pieces -
St Patrick’s Day 3D top hat with a buckle Solid · 5 pieces -
3D top hat to print and cut by hand Outline · 40 pieces -
3D top hat made up, in four colours Layered · 4 pieces -
3D top hat with a band Solid · 3 pieces -
Tall stovepipe 3D top hat Solid · 3 pieces
← 3D top hat favour box with a lid All 10 3D top hats Flared 3D top hat with a curved band →