3D top hat to print and cut by hand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The classic hat as a drawing: a solid line where you cut and dashes on the long fold. Print it 200 mm wide on card, cut it out with scissors, snip between the teeth and fold each one over a ruler. The disc from the brim is the top.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.93 in), scales to any size |
|---|---|
| Pieces | 40 separate pieces |
| Outlines to cut | 44: 40 outer edges and 4 cut-outs |
| Cut length | 2,008 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 489 curve and line segments |
Measured from the file. PNG: 2,000 × 1,996 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.3 mm | 510 mm | 100 | Too fine for most machines |
| 2 × 2 in (51 × 51 mm) | 0.61 mm | 1,020 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.99 in (76 × 76 mm) | 0.91 mm | 1,530 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.99 in (102 × 101 mm) | 1.2 mm | 2,040 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.99 in (152 × 152 mm) | 1.8 mm | 3,060 mm | 1 | Vinyl, card and thin sheet |
| 8 × 7.98 in (203 × 203 mm) | 2.4 mm | 4,080 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.98 in (305 × 304 mm) | 3.7 mm | 6,120 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
3D top hat made up, in four colours Layered · 4 pieces -
3D top hat with a band Solid · 3 pieces -
Tall stovepipe 3D top hat Solid · 3 pieces -
3D top hat favour box with a lid Solid · 4 pieces -
Two mini 3D top hats for a cake Solid · 4 pieces -
Flared 3D top hat with a curved band Solid · 4 pieces -
Snowman 3D top hat with holly Solid · 5 pieces -
Mini 3D top hat for a headband Solid · 5 pieces
← St Patrick’s Day 3D top hat with a buckle All 10 3D top hats 3D top hat made up, in four colours →