St Patrick’s Day 3D top hat with a buckle SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A hat to cut in green: crown, brim, a wide band, a square buckle whose bars cover the band’s edges, and a shamrock. Cut 210 mm tall, it is 59 mm across the crown, 61 mm tall and 104 mm across the brim, and the buckle is 31 mm wide. Loose pieces.
What is in the file
| Size | 94 × 100 mm (3.69 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 72: 5 outer edges and 67 cut-outs |
| Cut length | 1,231 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 444 curve and line segments |
Measured from the file. PNG: 1,881 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.94 × 1 in (24 × 25 mm) | 0.51 mm | 313 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.88 × 2 in (48 × 51 mm) | 1 mm | 625 mm | 25 | Vinyl, card and thin sheet |
| 2.81 × 3 in (71 × 76 mm) | 1.5 mm | 938 mm | 12 | Vinyl, card and thin sheet |
| 3.75 × 4 in (95 × 102 mm) | 2 mm | 1,251 mm | 6 | Vinyl, card and thin sheet |
| 5.63 × 6 in (143 × 152 mm) | 3 mm | 1,876 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.5 × 8 in (191 × 203 mm) | 4.1 mm | 2,501 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.26 × 12 in (286 × 305 mm) | 6.1 mm | 3,752 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
3D top hat to print and cut by hand Outline · 40 pieces -
3D top hat made up, in four colours Layered · 4 pieces -
3D top hat with a band Solid · 3 pieces -
Tall stovepipe 3D top hat Solid · 3 pieces -
3D top hat favour box with a lid Solid · 4 pieces -
Two mini 3D top hats for a cake Solid · 4 pieces -
Flared 3D top hat with a curved band Solid · 4 pieces -
Snowman 3D top hat with holly Solid · 5 pieces
← Mini 3D top hat for a headband All 10 3D top hats 3D top hat to print and cut by hand →