Snowman 3D top hat with holly SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A squat, flared hat for a snowman: a crown that leans out, a curved band, a wide brim, a top disc and a sprig of holly for the band. Cut 225 mm tall, it is 66 mm across the top, 53 mm at the brim, 36 mm tall and 101 mm across the brim. Loose pieces.
What is in the file
| Size | 91 × 100 mm (3.58 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 69: 5 outer edges and 64 cut-outs |
| Cut length | 1,143 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 420 curve and line segments |
Measured from the file. PNG: 1,825 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.91 × 1 in (23 × 25 mm) | 0.46 mm | 290 mm | 110 | Too fine for most machines |
| 1.82 × 2 in (46 × 51 mm) | 0.91 mm | 581 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.73 × 3 in (69 × 76 mm) | 1.4 mm | 871 mm | 12 | Vinyl, card and thin sheet |
| 3.64 × 4 in (92 × 102 mm) | 1.8 mm | 1,161 mm | 6 | Vinyl, card and thin sheet |
| 5.45 × 6 in (139 × 152 mm) | 2.7 mm | 1,742 mm | 2 | Vinyl, card and thin sheet |
| 7.27 × 8 in (185 × 203 mm) | 3.7 mm | 2,323 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.91 × 12 in (277 × 305 mm) | 5.5 mm | 3,484 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
Mini 3D top hat for a headband Solid · 5 pieces -
St Patrick’s Day 3D top hat with a buckle Solid · 5 pieces -
3D top hat to print and cut by hand Outline · 40 pieces -
3D top hat made up, in four colours Layered · 4 pieces -
3D top hat with a band Solid · 3 pieces -
Tall stovepipe 3D top hat Solid · 3 pieces -
3D top hat favour box with a lid Solid · 4 pieces -
Two mini 3D top hats for a cake Solid · 4 pieces
← Flared 3D top hat with a curved band All 10 3D top hats Mini 3D top hat for a headband →