3D top hat favour box with a lid SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A hat that holds sweets. The crown stands on a solid base with the brim ring glued over its teeth, and the disc from the middle of the brim tops a lid 2 mm larger than the crown. Cut 205 mm wide, it is 61 mm across inside and 51 mm deep. Loose pieces.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.59 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 75: 4 outer edges and 71 cut-outs |
| Cut length | 1,228 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 446 curve and line segments |
Measured from the file. PNG: 2,000 × 1,831 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.51 mm | 312 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.82 in (51 × 46 mm) | 1 mm | 624 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.74 in (76 × 69 mm) | 1.5 mm | 936 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.65 in (102 × 93 mm) | 2 mm | 1,248 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.47 in (152 × 139 mm) | 3 mm | 1,871 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.3 in (203 × 185 mm) | 4.1 mm | 2,495 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.94 in (305 × 278 mm) | 6.1 mm | 3,743 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D top hat SVG files
-
Two mini 3D top hats for a cake Solid · 4 pieces -
Flared 3D top hat with a curved band Solid · 4 pieces -
Snowman 3D top hat with holly Solid · 5 pieces -
Mini 3D top hat for a headband Solid · 5 pieces -
St Patrick’s Day 3D top hat with a buckle Solid · 5 pieces -
3D top hat to print and cut by hand Outline · 40 pieces -
3D top hat made up, in four colours Layered · 4 pieces -
3D top hat with a band Solid · 3 pieces
← Tall stovepipe 3D top hat All 10 3D top hats Two mini 3D top hats for a cake →