Wrestling singlet SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A singlet laid flat: two straps, a deep scooped neck, cut-away arm holes and short legs, with a curved stripe down each side and a hem line on each leg. Exactly mirrored, with a plain chest for an initial.
What is in the file
| Size | 51 × 100 mm (1.99 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 637 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 76 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,048 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.51 × 1 in (13 × 25 mm) | 0.61 mm | 162 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 1.01 × 2 in (26 × 51 mm) | 1.2 mm | 324 mm | 50 | Vinyl, card and thin sheet |
| 1.52 × 3 in (38 × 76 mm) | 1.8 mm | 485 mm | 21 | Vinyl, card and thin sheet |
| 2.02 × 4 in (51 × 102 mm) | 2.4 mm | 647 mm | 10 | Vinyl, card and thin sheet |
| 3.03 × 6 in (77 × 152 mm) | 3.7 mm | 971 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.04 × 8 in (103 × 203 mm) | 4.9 mm | 1,294 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.06 × 12 in (154 × 305 mm) | 7.3 mm | 1,942 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling headgear Solid · one piece -
Pair of wrestling shoes Solid · one piece -
Wrestling mat from above Solid · one piece -
Wrestling badge with two wrestlers in a ring Solid · one piece -
Wrestling champion belt Solid · one piece -
Wrestling mask with flames Solid · one piece -
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece
← Wrestling referee raising the winner’s arm All 13 wrestling designs Wrestling headgear →