Wrestling mask with flames SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A masked wrestler’s hood, facing you: two slanted eye openings with three flames rising from each, a mouth opening, a star on the brow and a sweep across each cheek. Exactly mirrored, and no real wrestler’s mask.
What is in the file
| Size | 74 × 100 mm (2.92 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 854 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 84 curve and line segments |
| Symmetry | Mirror |
| Also found as | Mexican wrestling mask SVG |
Measured from the file. PNG: 1,502 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.74 × 1 in (19 × 25 mm) | 0.99 mm | 217 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.48 × 2 in (38 × 51 mm) | 2 mm | 434 mm | 35 | Vinyl, card and thin sheet |
| 2.22 × 3 in (56 × 76 mm) | 3 mm | 651 mm | 15 | Vinyl, card and thin sheet |
| 2.96 × 4 in (75 × 102 mm) | 4 mm | 868 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.45 × 6 in (113 × 152 mm) | 5.9 mm | 1,301 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.93 × 8 in (151 × 203 mm) | 7.9 mm | 1,735 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8.89 × 12 in (226 × 305 mm) | 12 mm | 2,603 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece -
Wrestling lift from behind Solid · one piece -
Wrestling referee raising the winner’s arm Solid · one piece -
Wrestling singlet Solid · one piece -
Wrestling headgear Solid · one piece
← Wrestling champion belt All 13 wrestling designs Layered wrestling stance in four colours →