Layered wrestling stance in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack, facing left: the wrestler in his stance as a dark silhouette, a red singlet over the body and thighs, black shoes and a pale ear guard with its chin strap.
What is in the file
| Size | 100 × 82 mm (3.94 × 3.24 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 5 outlines |
| Cut length | 736 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 266 curve and line segments |
| Layers | 4: wrestler, singlet, shoes and headgear |
Measured from the file. PNG: 2,000 × 1,658 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.82 in (25 × 21 mm) | Over 1.5 mm | 187 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.64 in (51 × 42 mm) | Over 3 mm | 374 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.47 in (76 × 63 mm) | Over 4.6 mm | 561 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.29 in (102 × 84 mm) | Over 6.1 mm | 748 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.93 in (152 × 125 mm) | Over 9.1 mm | 1,122 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.58 in (203 × 167 mm) | Over 12 mm | 1,496 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.86 in (305 × 251 mm) | Over 18 mm | 2,243 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece -
Wrestling lift from behind Solid · one piece -
Wrestling referee raising the winner’s arm Solid · one piece -
Wrestling singlet Solid · one piece -
Wrestling headgear Solid · one piece -
Pair of wrestling shoes Solid · one piece
← Wrestling mask with flames All 13 wrestling designs Wrestling silhouette of a collar tie →