Pair of wrestling shoes SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two slim high-topped shoes standing heel to heel with their toes pointing out: thin soles, four laces, a strap over the knot and a pull loop at the back. Exactly mirrored, the pair a senior leaves on the mat.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.63 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 748 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 120 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 871 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.38 mm | 190 mm | 190 | Too fine for most machines |
| 2 × 0.83 in (51 × 21 mm) | 0.76 mm | 380 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.24 in (76 × 31 mm) | 1.1 mm | 570 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.65 in (102 × 42 mm) | 1.5 mm | 760 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.48 in (152 × 63 mm) | 2.3 mm | 1,140 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.3 in (203 × 84 mm) | 3 mm | 1,520 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.96 in (305 × 126 mm) | 4.6 mm | 2,280 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling mat from above Solid · one piece -
Wrestling badge with two wrestlers in a ring Solid · one piece -
Wrestling champion belt Solid · one piece -
Wrestling mask with flames Solid · one piece -
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece
← Wrestling headgear All 13 wrestling designs Wrestling mat from above →