Wrestling badge with two wrestlers in a ring SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The two wrestlers in their collar tie, standing on a strip of mat inside a ring with three stars over their heads. A round badge for club shirts, a kit bag or the door of a wrestling room.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 981 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 250 curve and line segments |
| Also found as | Wrestle SVG |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.81 mm | 249 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.6 mm | 498 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 2.4 mm | 748 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 3.3 mm | 997 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 4.9 mm | 1,495 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 6.5 mm | 1,993 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 9.8 mm | 2,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling champion belt Solid · one piece -
Wrestling mask with flames Solid · one piece -
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece -
Wrestling lift from behind Solid · one piece -
Wrestling referee raising the winner’s arm Solid · one piece
← Wrestling mat from above All 13 wrestling designs Wrestling champion belt →