Wrestling champion belt SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A champion’s belt laid out flat: a wide strap with a round middle plate that carries a star and a broken ring, a small starred plate each side and two snaps at each end. Exactly mirrored.
What is in the file
| Size | 100 × 51 mm (3.94 × 2.02 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 679 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 179 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,063 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.51 in (25 × 13 mm) | 0.76 mm | 172 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.03 in (51 × 26 mm) | 1.5 mm | 345 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.54 in (76 × 39 mm) | 2.3 mm | 517 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2.05 in (102 × 52 mm) | 3 mm | 690 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.08 in (152 × 78 mm) | 4.6 mm | 1,035 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.1 in (203 × 104 mm) | 6.1 mm | 1,380 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.16 in (305 × 156 mm) | 9.1 mm | 2,070 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling mask with flames Solid · one piece -
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece -
Wrestling lift from behind Solid · one piece -
Wrestling referee raising the winner’s arm Solid · one piece -
Wrestling singlet Solid · one piece
← Wrestling badge with two wrestlers in a ring All 13 wrestling designs Wrestling mask with flames →