Wrestling mat from above SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The mat seen from above: a square with the big circle, the small circle in the middle and the two starting lines cut into it. The lines are broken by bridges, so the whole mat stays in one piece.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,115 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 88 curve and line segments |
| Symmetry | 2-fold rotation and mirror |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.94 mm | 283 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.9 mm | 566 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 2.8 mm | 850 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 3.8 mm | 1,133 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 5.6 mm | 1,699 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 7.5 mm | 2,266 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 11 mm | 3,399 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wrestling SVG files
-
Wrestling badge with two wrestlers in a ring Solid · one piece -
Wrestling champion belt Solid · one piece -
Wrestling mask with flames Solid · one piece -
Layered wrestling stance in four colours Layered · 5 pieces -
Wrestling silhouette of a collar tie Solid · one piece -
Wrestler in a wrestling stance Solid · one piece -
Wrestling double leg takedown Solid · one piece -
Wrestling lift from behind Solid · one piece
← Pair of wrestling shoes All 13 wrestling designs Wrestling badge with two wrestlers in a ring →