Free witch hat SVG

Witch hat with stars and a moon SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Witch hat with stars and a moon, as a solid black shape
Witch hat with stars and a moon. The preview is the SVG file itself.

A soft hat with a wavy brim and a tip that curls over, with a crescent moon and four five-pointed stars cut from the cone above a plain band. Back the cut-outs with gold or glow vinyl.

What is in the file

Size100 × 98 mm (3.94 × 3.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length627 mm at this size
Narrowest part1.1 mm at this size
Nodes88 curve and line segments

Measured from the file. PNG: 2,000 × 1,962 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.28 mm159 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.56 mm319 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)0.84 mm478 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.92 in (102 × 100 mm)1.1 mm637 mm4Vinyl, card and thin sheet
6 × 5.88 in (152 × 149 mm)1.7 mm956 mm2Vinyl, card and thin sheet
8 × 7.84 in (203 × 199 mm)2.2 mm1,274 mm1Vinyl, card and thin sheet
12 × 11.76 in (305 × 299 mm)3.4 mm1,911 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Witch hat outline All 19 witch hats Witch hat with a hanging spider →