Free witch hat SVG

Witch hat with a hanging spider SVG

Witch hat with a hanging spider, as a solid black shape — Witch hat with a hanging spider. The preview is the SVG file itself.

A spider drops on a thread from the bent tip of a side-on hat and hangs beside the cone. The thread is 2 mm wide at 100 mm, so cut this one at full size or larger.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.22 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	705 mm at this size
Narrowest part	2.1 mm at this size
Nodes	95 curve and line segments

Measured from the file. PNG: 2,000 × 1,648 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.53 mm	179 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.63 in (51 × 42 mm)	1.1 mm	358 mm	30	Vinyl, card and thin sheet
3 × 2.45 in (76 × 62 mm)	1.6 mm	537 mm	12	Vinyl, card and thin sheet
4 × 3.27 in (102 × 83 mm)	2.1 mm	716 mm	6	Vinyl, card and thin sheet
6 × 4.9 in (152 × 125 mm)	3.2 mm	1,074 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.54 in (203 × 166 mm)	4.3 mm	1,433 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.8 in (305 × 249 mm)	6.4 mm	2,149 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Witch hat with stars and a moon All 19 witch hats Witch hat with a bow →