Free witch hat SVG

Witch hat with a curly tip SVG

Witch hat with a curly tip, as a solid black shape
Witch hat with a curly tip. The preview is the SVG file itself.

A storybook hat whose cone winds up into a spiral curl, with a plain band and a wavy brim. Good for children’s party decorations.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 94 mm (3.94 × 3.71 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length519 mm at this size
Narrowest part2.5 mm at this size
Nodes239 curve and line segments

Measured from the file. PNG: 2,000 × 1,888 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)0.64 mm132 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.88 in (51 × 48 mm)1.3 mm264 mm25Vinyl, card and thin sheet
3 × 2.83 in (76 × 72 mm)1.9 mm395 mm12Vinyl, card and thin sheet
4 × 3.77 in (102 × 96 mm)2.5 mm527 mm6Vinyl, card and thin sheet
6 × 5.65 in (152 × 144 mm)3.8 mm791 mm2Any material, including 3 mm wood and acrylic
8 × 7.54 in (203 × 191 mm)5.1 mm1,055 mm1Any material, including 3 mm wood and acrylic
12 × 11.3 in (305 × 287 mm)7.6 mm1,582 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Striped witch hat All 19 witch hats Tilted witch hat for a letter →