Free witch hat SVG

Witch flying across the moon SVG

Witch flying across the moon, as a solid black shape — Witch flying across the moon. The preview is the SVG file itself.

A full moon with the witch on her broom cut out of it. Cut it from white or yellow vinyl and the witch shows as the dark surface behind.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	760 mm at this size
Narrowest part	3.1 mm at this size
Nodes	188 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.79 mm	193 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.6 mm	386 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.4 mm	579 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.1 mm	772 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	4.7 mm	1,158 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	6.3 mm	1,544 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	9.4 mm	2,316 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Witch on a broom silhouette All 19 witch hats Witch head silhouette from the side →