Free witch hat SVG

Witch hat from the front with a big buckle SVG

Witch hat from the front with a big buckle, as a solid black shape — Witch hat from the front with a big buckle. The preview is the SVG file itself.

The straight hat with a wide band and a large square buckle in the middle. It is the same on both sides, so it sits squarely over a name, a face or a pumpkin.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	457 mm at this size
Narrowest part	2.8 mm at this size
Nodes	39 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,904 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.71 mm	116 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.4 mm	232 mm	25	Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)	2.1 mm	348 mm	12	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	2.8 mm	464 mm	6	Vinyl, card and thin sheet
6 × 5.7 in (152 × 145 mm)	4.3 mm	696 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.6 in (203 × 193 mm)	5.7 mm	929 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.4 in (305 × 290 mm)	8.5 mm	1,393 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Simple witch hat silhouette All 19 witch hats Crooked witch hat →