Free witch hat SVG

Witch hat outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Witch hat outline, drawn as a line
Witch hat outline. The preview is the SVG file itself.

The classic bent hat as a line drawing: the brim, the cone, the band and its buckle. For colouring sheets, foil and pen plotting.

What is in the file

Size100 × 97 mm (3.94 × 3.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,030 mm at this size
Narrowest part2.3 mm at this size
Nodes121 curve and line segments

Measured from the file. PNG: 2,000 × 1,935 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.58 mm262 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.93 in (51 × 49 mm)1.2 mm523 mm25Vinyl, card and thin sheet
3 × 2.9 in (76 × 74 mm)1.8 mm785 mm9Vinyl, card and thin sheet
4 × 3.86 in (102 × 98 mm)2.3 mm1,046 mm6Vinyl, card and thin sheet
6 × 5.8 in (152 × 147 mm)3.5 mm1,570 mm2Any material, including 3 mm wood and acrylic
8 × 7.73 in (203 × 196 mm)4.7 mm2,093 mm1Any material, including 3 mm wood and acrylic
12 × 11.59 in (305 × 294 mm)7 mm3,139 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Crooked witch hat All 19 witch hats Witch hat with stars and a moon →