Free witch hat SVG

Three witch hats in a row SVG

Three witch hats in a row, as a solid black shape — Three witch hats in a row. The preview is the SVG file itself.

A tall hat between two smaller ones that lean away from it, their brims overlapping so the three cut as one piece. For a mantel banner or the top of a sign.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 62 mm (3.94 × 2.45 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	588 mm at this size
Narrowest part	1.7 mm at this size
Nodes	82 curve and line segments

Measured from the file. PNG: 2,000 × 1,275 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.62 in (25 × 16 mm)	0.43 mm	149 mm	140	Too fine for most machines
2 × 1.25 in (51 × 32 mm)	0.86 mm	299 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 47 mm)	1.3 mm	448 mm	15	Vinyl, card and thin sheet
4 × 2.49 in (102 × 63 mm)	1.7 mm	597 mm	8	Vinyl, card and thin sheet
6 × 3.74 in (152 × 95 mm)	2.6 mm	896 mm	3	Vinyl, card and thin sheet
8 × 4.98 in (203 × 127 mm)	3.5 mm	1,195 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.48 in (305 × 190 mm)	5.2 mm	1,792 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Tilted witch hat for a letter All 19 witch hats Witch on a broom silhouette →