Free witch hat SVG

Tilted witch hat for a letter SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tilted witch hat for a letter, as a solid black shape
Tilted witch hat for a letter. The preview is the SVG file itself.

A side-on hat tipped at an angle, ready to hang on the corner of an initial or a photo. Line the thin brim up with the top of your letter and weld.

What is in the file

Size97 × 100 mm (3.82 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length473 mm at this size
Narrowest part2.5 mm at this size
Nodes31 curve and line segments
Also found asWitch hat monogram SVG

Measured from the file. PNG: 1,944 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.64 mm120 mm100Fine detail: vinyl and paper only, weed with care
1.94 × 2 in (49 × 51 mm)1.3 mm240 mm25Vinyl, card and thin sheet
2.91 × 3 in (74 × 76 mm)1.9 mm360 mm9Vinyl, card and thin sheet
3.88 × 4 in (99 × 102 mm)2.5 mm481 mm4Vinyl, card and thin sheet
5.83 × 6 in (148 × 152 mm)3.8 mm721 mm2Any material, including 3 mm wood and acrylic
7.77 × 8 in (197 × 203 mm)5.1 mm961 mm1Any material, including 3 mm wood and acrylic
11.65 × 12 in (296 × 305 mm)7.6 mm1,442 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Witch hat with a curly tip All 19 witch hats Three witch hats in a row →