Free witch hat SVG

Classic witch hat with a buckle SVG

Classic witch hat with a buckle, as a solid black shape — Classic witch hat with a buckle. The preview is the SVG file itself.

A round brim and a tall cone whose tip bends over to one side, with a band cut as a slot and a square buckle across it. The buckle bridges the slot, so the hat is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 97 mm (3.94 × 3.8 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	478 mm at this size
Narrowest part	2.9 mm at this size
Nodes	45 curve and line segments

Measured from the file. PNG: 2,000 × 1,935 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.97 in (25 × 25 mm)	0.74 mm	121 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.93 in (51 × 49 mm)	1.5 mm	243 mm	25	Vinyl, card and thin sheet
3 × 2.9 in (76 × 74 mm)	2.2 mm	364 mm	9	Vinyl, card and thin sheet
4 × 3.86 in (102 × 98 mm)	2.9 mm	486 mm	6	Vinyl, card and thin sheet
6 × 5.8 in (152 × 147 mm)	4.4 mm	728 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.73 in (203 × 196 mm)	5.9 mm	971 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.59 in (305 × 294 mm)	8.8 mm	1,457 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Witch cauldron over a fire All 19 witch hats Simple witch hat silhouette →