Free witch hat SVG

Simple witch hat silhouette SVG

Simple witch hat silhouette, as a solid black shape — Simple witch hat silhouette. The preview is the SVG file itself.

A short, wide hat with a plain leaning cone, a round brim and no holes at all. It weeds in seconds and still reads as a witch hat at 20 mm.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	280 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	25 curve and line segments

Measured from the file. PNG: 2,000 × 1,467 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	Over 1.5 mm	71 mm	130	Vinyl, card and thin sheet
2 × 1.45 in (51 × 37 mm)	Over 3 mm	142 mm	35	Any material, including 3 mm wood and acrylic
3 × 2.17 in (76 × 55 mm)	Over 4.6 mm	213 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.89 in (102 × 73 mm)	Over 6.1 mm	284 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.34 in (152 × 110 mm)	Over 9.1 mm	427 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.78 in (203 × 147 mm)	Over 12 mm	569 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.68 in (305 × 220 mm)	Over 18 mm	853 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch hat SVG files

← Classic witch hat with a buckle All 19 witch hats Witch hat from the front with a big buckle →