Free Welcome SVG

Welcome with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome with a swash underline, as a solid black shape
Welcome with a swash underline. The preview is the SVG file itself.

“Welcome” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 31 mm (3.94 × 1.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length760 mm at this size
Narrowest part1.3 mm at this size
Nodes220 curve and line segments

Measured from the file. PNG: 2,000 × 669 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.33 mm193 mm240Too fine for most machines
2 × 0.62 in (51 × 16 mm)0.66 mm386 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.92 in (76 × 23 mm)0.99 mm579 mm30Fine detail: vinyl and paper only, weed with care
4 × 1.23 in (102 × 31 mm)1.3 mm772 mm16Vinyl, card and thin sheet
6 × 1.85 in (152 × 47 mm)2 mm1,158 mm5Vinyl, card and thin sheet
8 × 2.46 in (203 × 63 mm)2.6 mm1,544 mm4Vinyl, card and thin sheet
12 × 3.7 in (305 × 94 mm)4 mm2,316 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome in block capitals All 13 Welcome designs Welcome with hearts →