Free Welcome SVG

Welcome in block capitals SVG

Welcome in block capitals, as a solid black shape — Welcome in block capitals. The preview is the SVG file itself.

“WELCOME” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 25 mm (3.94 × 0.98 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	8: 7 outer edges and 1 cut-out
Cut length	806 mm at this size
Narrowest part	2.5 mm at this size
Nodes	100 curve and line segments

Measured from the file. PNG: 2,000 × 554 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.25 in (25 × 6 mm)	0.64 mm	205 mm	270	Fine detail: vinyl and paper only, weed with care
2 × 0.5 in (51 × 13 mm)	1.3 mm	409 mm	85	Vinyl, card and thin sheet
3 × 0.74 in (76 × 19 mm)	1.9 mm	614 mm	36	Vinyl, card and thin sheet
4 × 0.99 in (102 × 25 mm)	2.5 mm	819 mm	20	Vinyl, card and thin sheet
6 × 1.49 in (152 × 38 mm)	3.8 mm	1,228 mm	7	Any material, including 3 mm wood and acrylic
8 × 1.98 in (203 × 50 mm)	5.1 mm	1,638 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.98 in (305 × 76 mm)	7.6 mm	2,457 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome in Amatic SC All 12 Welcome designs Welcome with a swash underline →