Free Welcome SVG

Welcome with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome with hearts, as a solid black shape
Welcome with hearts. The preview is the SVG file itself.

“Welcome” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 51 mm (3.94 × 2.02 in), scales to any size
Pieces8 separate pieces
Outlines to cut11: 8 outer edges and 3 cut-outs
Cut length782 mm at this size
Narrowest part1.1 mm at this size
Nodes189 curve and line segments

Measured from the file. PNG: 2,000 × 1,065 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.28 mm199 mm170Too fine for most machines
2 × 1.03 in (51 × 26 mm)0.56 mm397 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.54 in (76 × 39 mm)0.84 mm596 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.06 in (102 × 52 mm)1.1 mm795 mm10Vinyl, card and thin sheet
6 × 3.08 in (152 × 78 mm)1.7 mm1,192 mm3Vinyl, card and thin sheet
8 × 4.11 in (203 × 104 mm)2.2 mm1,589 mm2Vinyl, card and thin sheet
12 × 6.17 in (305 × 157 mm)3.4 mm2,384 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome with a swash underline All 13 Welcome designs Welcome outline lettering →