Free Welcome SVG

Welcome in Pacifico SVG

Welcome in Pacifico, as a solid black shape — Welcome in Pacifico. The preview is the SVG file itself.

“Welcome” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 24 mm (3.94 × 0.95 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	579 mm at this size
Narrowest part	1.9 mm at this size
Nodes	236 curve and line segments

Measured from the file. PNG: 2,000 × 542 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.24 in (25 × 6 mm)	0.48 mm	147 mm	270	Too fine for most machines
2 × 0.48 in (51 × 12 mm)	0.97 mm	294 mm	85	Fine detail: vinyl and paper only, weed with care
3 × 0.73 in (76 × 18 mm)	1.4 mm	441 mm	39	Vinyl, card and thin sheet
4 × 0.97 in (102 × 25 mm)	1.9 mm	588 mm	20	Vinyl, card and thin sheet
6 × 1.45 in (152 × 37 mm)	2.9 mm	882 mm	7	Vinyl, card and thin sheet
8 × 1.94 in (203 × 49 mm)	3.9 mm	1,177 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.9 in (305 × 74 mm)	5.8 mm	1,765 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome with a drop shadow All 12 Welcome designs Welcome in Lobster →