Free Welcome SVG

Welcome with a little house SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome with a little house, as a solid black shape — Welcome with a little house. The preview is the SVG file itself.

“Welcome” with a little house above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	22: 3 outer edges and 19 cut-outs
Cut length	1,065 mm at this size
Narrowest part	0.6 mm at this size
Nodes	275 curve and line segments

Measured from the file. PNG: 2,000 × 1,404 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.15 mm	271 mm	130	Too fine for most machines
2 × 1.38 in (51 × 35 mm)	0.3 mm	541 mm	35	Too fine for most machines
3 × 2.07 in (76 × 53 mm)	0.46 mm	812 mm	15	Too fine for most machines
4 × 2.76 in (102 × 70 mm)	0.61 mm	1,082 mm	8	Fine detail: vinyl and paper only, weed with care
6 × 4.14 in (152 × 105 mm)	0.91 mm	1,623 mm	2	Fine detail: vinyl and paper only, weed with care
8 × 5.52 in (203 × 140 mm)	1.2 mm	2,164 mm	2	Vinyl, card and thin sheet
12 × 8.28 in (305 × 210 mm)	1.8 mm	3,246 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome with a drop shadow All 13 Welcome designs Welcome in Pacifico →